Do it yourself
Daily, bi-weekly and monthly maintenance of the BlueMaxi cleaner
08/02/2023
A quick and easy guide to the complete maintenance (daily, fortnightly and monthly) of your BlueMaxi pool cleaner. With these tips, you can have your pool cleaner as good as new from the first day of use.
Remember that these daily recommendations are to extend the life of your pool cleaner. All products are built to last but it is always advisable to take simple actions to save money in the long run.
Daily routine (after each use)
1. Open the filter cover.
2. Once the filter lid has been opened, the handle will lift up independently.
3. Pull out the basket.
4. Open the latch to release the lower lid to remove impurities.
5. Clean the filter basket with a hose.
Remember that if you have any questions, you can contact us.
Fortnightly routine (every 15 - 20 days)
3. Clean the filter panels with the help of a hose.
4. Assemble the filter panels in reverse numerical order (4,3,2,1)
5. Insert the clean basket and close the filter cover.
Monthly routine (every 30-40 days)
1. Remember to unplug the robot from the power supply.
2. Lift the top cover of the robot and, using a screwdriver, remove the screws from the plastic part next to the handle.
3. Clean any dirt you can find in the impeller compartment.
4. Screw the part you removed earlier back on.
Daily routine (after each use)
1. Open the filter cover.
2. Once the filter lid has been opened, the handle will lift up independently.
3. Pull out the basket.
4. Open the latch to release the lower lid to remove impurities.
5. Clean the filter basket with a hose.
Remember that if you have any questions, you can contact us.
Fortnightly routine (every 15 - 20 days)
1
. Remove the panels by pressing on "panel 1" with your thumbs.
2.
Continue removing the panels following the numerical order (2,3,4)
3. Clean the filter panels with the help of a hose.
4. Assemble the filter panels in reverse numerical order (4,3,2,1)
5. Insert the clean basket and close the filter cover.
Monthly routine (every 30-40 days)
1. Remember to unplug the robot from the power supply.
2. Lift the top cover of the robot and, using a screwdriver, remove the screws from the plastic part next to the handle.
3. Clean any dirt you can find in the impeller compartment.
4. Screw the part you removed earlier back on.