Jet Series Pump
4/5
- Self-priming pump with excellent suction capacity, even in the presence of gas in the water.
- Particularly suitable for use in domestic pressure boosting systems with negative suction, small irrigation systems and gardens, etc.
- Particularly suitable for water supply in domestic installations, small-scale agriculture, gardening and wherever self-priming operation is required.
- Cast iron pump body and motor support. Technopolymer impeller, diffuser, venturi tube and sand protector.
- Stainless steel adjusting rings.
- Carbon/ceramic mechanical seal. Closed, externally ventilated asynchronous motor.
- Built-in thermal and overcurrent protection and a permanently on capacitor in the single-phase version,
- For the protection of the three-phase motor it is recommended to use a suitable overload protection complying with current standards.
- Liquid temperature range: from 0°C to 35°C for domestic use from 0°C to 40°C for other uses.
- Pumped liquid characteristics: clean, free of solids or abrasive substances,
non-viscous, non-aggressive, non-crystallised and chemically neutral. - Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom 8 bar (800 kPa) for Jetinox.
- Degree of protection: IP 44 (terminal block protection IP 55).
- Insulation class: F
Download Technical information
