Self-cleaning saline mark Innowater salt code 10 30 m3 +PH - SALT15 50M3 +PH - SALT20 100M3+PH- SALT30 150M3+PH
Peristaltic dosing pump PH Basic next astralpooll for proportional dosing of pH m
Automatic pH control and dosing system
Includes complete installation kit, consisting of:
pH sensor
Carriers
Standard solutions for probe calibration
Suction and drive tubes
Suction and drive fittings
Available in flow rates of 1.5, l/h.
Measuring range of 0... 14 (pH models)
Mounted in ABS box with IP65 protection.
Easy-to-read digital display.
Remote stop/power input (230 VAC) keeping the display on for calibration and programming.
Download Instruction manual
Healthy: Saline water is a natural antiseptic that inhibits the formation of bacteria and algae, acting on the bather's skin in a natural way. Its low saline concentration, similar to the tears of the human eye, avoids eye and dermatological disorders produced by the traditional system.
Safe: It does not use chemical products so there is no risk of intoxication. The only raw material used is salt. It does not need storage, which eliminates the risk of fire or explosion. It eliminates the corrosive environment of purification rooms and bad smells in indoor pools.
Ecological: The salt remains in the water in a closed and permanent process, which allows the water to remain unchanged for several years, a very important saving with such a scarce resource as water in some provinces.
Economical: With a saving of 80% in maintenance and 100% in chemical products (as there are none). Once the equipment has been amortised, the production cost is 90% lower than that of traditional chlorine.
Efficient: Because the Innowater system produces sodium hypochlorite by electrolysis and other sanitary agents such as ozone, oxygen and radical oxydryl, inhibiting the formation of bacteria and algae. And also... It promotes tanning due to the iodine content in the salt. It eliminates skin irritation, making it unnecessary to shower after bathing. Protects the hair and does not discolour swimming costumes. The unpleasant smell and taste of traditional chlorine is eliminated.
It is automatic: the equipment is switched on, and the required chlorine production is adjusted. It does not require civil works and can be adapted to any purification system.