Zodiac cleansy suction flow meter

• Perform a flow test to adjust the suction required for the cleaner's operation with the help of this flow meter.
• Optimise the suction capacity and performance of your Zodiac pool cleaner.
• Compatible with all Zodiac suction cleaners: T3, T5 Duo, Manta II, MX8, Super G, X7 Quattro, Zoom, etc.
• Look at the scale of values on the meter and the area where the red indicator is located to determine the actions to be taken. Listed below are some common recommendations for each case (refer to your cleaner's instruction manual for more information):

Ideal zone (3): The red indicator is at level 3, indicating that the flow rate is perfect for the automatic pool cleaner to operate correctly.
Lower range (0-2): The red indicator is below level 3.

1. Check and clean the filters and skimmer baskets, filtration pump, etc.
2. If you have a flow control valve, increase the flow rate.
3. Increase the flow rate by closing the valve on the skimmers if the cleaner is connected to the cleaner intake or by closing the valve on the cleaner intake if the cleaner is connected to a skimmer, until the indicator on the test device is in the ideal zone.

Upper range (4-6): The red indicator is above level 3.

1. If you have a flow control valve, lower the flow rate.
2. Reduce the flow by opening the skimmer valve if the cleaner is connected to the cleaner intake or by opening the cleaner intake valve if the cleaner is connected to the skimmer, until the gauge indicator is in the ideal zone.
3. Open the sump slightly to reduce the flow a little more.