Kemidose - Membrane dosing
5/5
- Dosing panel (diaphragm pumps) and pH and Rx control with two set points:
- 1 relay for pH.
- 1 relay for ORP with pump output.
- 1 relay for Redox with dry output for chlorinator or solenoid valve control.
Allows proportional dosing and remote stop/start operation if the pool pump is running.
Programming of set points and operation of the three relays independently. Allows simultaneous operation with liquid chlorine dosing pump and, at the same time, with salt chlorinator. With the advantage of being able to be programmed independently. Multipurpose equipment, allows automation of production-only chlorinators already installed.
Diaphragm pumps with a flow rate of 5 l at 5 bar.
Power supply 230÷Vac - 50/60 Hz - 20,5 W with galvanic isolation.
ABS casing with glass fibre and PVDF head.
Proportional dosing.
Measuring range: 0-14 pH and 0-1000 mV.
Alphanumeric display.
Assisted calibration.
- 1 relay for pH.
- 1 relay for ORP with pump output.
- 1 relay for Redox with dry output for chlorinator or solenoid valve control.
Allows proportional dosing and remote stop/start operation if the pool pump is running.
Programming of set points and operation of the three relays independently. Allows simultaneous operation with liquid chlorine dosing pump and, at the same time, with salt chlorinator. With the advantage of being able to be programmed independently. Multipurpose equipment, allows automation of production-only chlorinators already installed.
Diaphragm pumps with a flow rate of 5 l at 5 bar.
Power supply 230÷Vac - 50/60 Hz - 20,5 W with galvanic isolation.
ABS casing with glass fibre and PVDF head.
Proportional dosing.
Measuring range: 0-14 pH and 0-1000 mV.
Alphanumeric display.
Assisted calibration.
WITH THE PANEL
- 80 micron pre-filter glass.
- Probe holder cup.
- Flow probe.
- pH probe (with its connections).
- Gold Rx probe (with connections).