Elecro Nano Electric Heater

• Recommended for both above-ground and in-ground pools with a maximum volume of 25-50 m³.
• 3 kW - 6 kW electric heater designed for heating water in swimming pools or spas.
• Minimum flow rate required: 1,000 l/h.
• It incorporates a thermostat and, thanks to its titanium shielding, it requires very little maintenance.
• Easy"Plug & Play" installation.
• Includes adapters for connection to Ø 32 and 38 mm hoses.

* The 3Kw model includes electric connection cable.

• Power supply: 220-240V single phase.
• Flow specifications: Minimum = 1 m³/h Maximum = 17 m³/h.
• Heating element: titanium.
• Tube: stainless steel BS 316 (EN 1.4432).
• Control thermostat: 0 ~ 40°C (1°C graduation).
• Safety thermostat: 55°C (manual reset).
• Flow detector: contact wire coated with a thin layer of gold and titanium shaft.
• Wiring: with high temperature, silicon sheath and stranded copper conductors.
• Seals: special high-temperature polymer formulation.
• Water connections: female thread 1½".
• BSP, with adapters for connection to flexible pipe.
• Pressure during operation: 4 bar maximum.
• Installation: floor or wall mounting (vertical or horizontal).
• Application of standards: European Electromagnetic Compatibility directive 89/336/EEC and 93/068/EEC Standardised standards: EN 55014 - EN55104, EN5501, EN5502, CEI 801-4, CEI 801-2, CEI 801-3. / The European Low Voltage Directive 72/23/EEC / The Harmonised Standard EN 60335-2-35.